Week 9

Activity: Interface with microcontroller

Objective(s): To load the hex file into microcontroller

Contents:

On previous week, we had gradually completed writing the programming for the project. As the programming has been compiled, the project is built and it created a hex file to load it into the microcontroller. We use the UC00B for interface of the device with the microcontroller. Then a set of procedure is followed from the Internet on "How to load hex file into PIC". 

The following is the link:

http://www.microchip.com/forums/m432845.aspx

the hex file to be loaded into the microcontroller

UC00B is connected to a USB port

Loading the hex file into microcontoller

Result/Analysis:

Now the void in the microcontroller has been programmed with the set of programming now the fingerprint device is ready to be used.

A fully programmed device which is ready to be used

Conclusion:
In conclusion, we learnt how to load a hex file into a pic microcontroller. Plus now we had built a fully functional fingerprint device. We will now proceed on the project features on our next activity.